yageo corporation smd inductor / beads mbpl - - product identification internal no. tolerance inductance packaging(b:bulk) dimensions product symbol dip power inductors mbpl series electrical characteristics mbpl series part inductance tolerance test ser dc rated no. at ( r %) frequency (khz) resistance current ( p h) (khz) min. (m : )max (a)min mbpl1319b-r30m-s 0.30 20% 100 0.5 60 mbpl1319b-r60m-s 0.60 20% 100 1.0 60 mbpl1319b-r90m-s 0.90 20% 100 1.0 40 mbpl1319b-1r2m-s 1.20 20% 100 1.0 35 mbpl1220b-1r2m-s 1.20 20% 100 1.8 30 mbpl1220b-1r5m-s 1.50 20% 100 1.8 40 mbpl1217b-r30m-s 0.30 20% 100 0.7 45 mbpl1217b-r60m-s 0.60 20% 100 1.5 40 mbpl1217b-r90m-s 0.90 20% 100 1.5 30 note: * at 25mhz ** at 7.9mhz when ordering please specify tolerance and packaging code. ex : pmc129- r60m-s tolerance: m r 20%, l r 15%, k r 10% packaging: clear tape and reel (standard) l q :hp4287a srf :hp8753d/e4991a rdc: digital multimeter sc-7401 operating temperature oc range -40 q c to +125 q c features ? magnetic shielded construction for high density board assembly ? high performance execllent dc current characteristics ? large energy storage capacity ? up to 40 amps continuous ? custom designs available shape and dimensions dimensions : mm mbpl1319 mbpl1220 mbpl1217
reel dimensions recommended pattern land pattern tape material carrier tape : polystyrene cover type : polyethylene tape dimensions dimensions : mm a b c coover tape 160mm min blank part blank chip mounting part 330mm min leader type tape reel recommended quantity dimensions dimensions pattern /reel abcde h abc abc pmc129 32 20 13.9 13.9 14.2 11.5 330 100 32.5 4 6 6.2 250 pmc127 32 20 13.9 13.9 14.2 9 330 100 32.5 4 6 6.2 250 pmc125 32 20 13.9 13.9 14.2 7 330 100 32.5 4 6 6.2 300 dimensions : mm
pmc series reliability test 1-1 mechanical performance no. item specification test conditions 1-1-1 vibration appearance :no damage test device shall solderd on the su bstrate l change :within r 10% oscillation frequency:10 to 50 to 10hz for imin q change :within r 30% amplitude : 1.5mm rdc:within specificadion time :2hrs,for each axis (x,y&z),total 6hrs 1-1-2 resistance to appearance :no damage pre-heating: 150oc , lmin. soldering heat solder composition: sn/pb= 63/37 solder temperature: 260 r 5oc lmmers ion time: 10 r lsec. 1-1-3 solderability the electrodes shall be at least 90% covered pre-heating: 150oc , lmin. with new solder coating. solder composition: sn/pb= 63/37 solder temperature: 230 r 5oc lmmers ion time: 4 r lsec. 1-2 environmental performance no item specification test conditions 1-2-1 temperature shock appearance: no damage 10 cycles (air to air) l cycles shall consist of: l change: within r 10% 30min.exposure to -55oc l change: within r 30% 30min.exposure to -125oc rdc: within speciflcation 15sec.max.transition between temperatures measured after exposure in the room condition for 24hrs. 1-2-2 temperature cycle one cycle step temperature(oc) time (min.) 1 -25 r 330 2 25 r 23 3 85 r 330 4 25 r 23 total: 100cycles measured after exposure in the room condition for 24hrs. 1-2-3 humidity resistance temperature: 40 r 2oc relative humidity: 90~95% time: 1000hrs. measured after exposure in the room condition for 24hrs. 1-2-4 high temperature temperature: 85 r 3oc resistance relative humidity: 20% applied current: rated current time: 1000hrs. measured after exposure in the room condition for 24hrs. 1-2-5 low temperature temperature: -25 r 3oc resistance relative humidity: 0% time: 1000hrs. measured after exposure in the room condition for 24hrs.
|
